150 Watts of raw power right at your fingertips! The Pioneer4You IPV V3 150 watt box mod is to most innovative and affordable regulated box mod on the market.
1. Water resist. It can protact your device in some distance.
1. Output Wattage: 7-150watt, it will allow you to fine-tune your vaping experience by adjusting your power from 7W to 150W;
2. Output Voltage: 1.0-7.0V, user can adjust to a desired voltage;
3. Able to fire coils at 0.1Ω up to 3.0Ω, this mod is powered by 2 IMR 18650 batteries and is capable of producing up to 150 watts of power;
4. Runs on the YiHi SX330 V3S chip and links to Yihi SX GUI desktop software for firmware updates/upgrades. Chip runs cool to avoid heat and temperature sensor malfunction;
5. Only one charging method, Users have to take the batteries out to charge them on Li-ion battery chargers;
6. The OLED screen is very easy to read, and it will tell you your wattage, resistance, output voltage and battery life at a glance;
7. Edge Polishing Technology allows cast body to mimic the smoothness of an iPhone;
8. The IPV V3 has a 510 threading, but will accept any 510 to eGo adapter if you'd like to use eGo-threaded atomizers;
9. The IPV V3 also has following protections to protect the battery: Low Voltage Protection; Low Resistance Protection; High Input Voltage Warning; Output Short Circuit Protection; Reverse Battery Protection, Locking mechanism to prevent misfire.
Power On/Off: Click the firing button 5 times.
Adjust Wattage: Click or hold the + or - button to increase or decrease wattage, respectively.
Lock/Unlock: Click and hold both the + and - buttons simultaneously. The screen will indicate the lock/unlock status.
Health cabin carries Nitecore Digicharger D4, Nitecore Digicharger D2, Nitecore Intellicharge i4, Nitecore Intellicharge i2 for you choice.
NO charging port comes with the new batch, so the new batch IPV V3 can only be charged via the Li-ion battery chargers;
The IPV V3 can only accept IMR 18650 batteries.
No IMR 18650 battery comes with the kit, customers have to buy them separately.
NO Touch Sensor function in this version even though there is a touch sensor.
This is an advanced mod for advanced users only. Please be aware that this mod requires knowledge of battery safety and technical know-how to work properly.
Size: Height 105mm;Width 50mm;Depth 23mm
Box Material: Aluminum
Shipping weight: 418g
Package: Crystal Box
Shipping method: Please check here for details.
Output Power: 7.0W – 150.0W
Output Voltage: 1.0V – 7.0V
Output Current: 40 Amps
Atomizer Resistance: 0.1Ω (Ohms)-3.0 Ω (Ohms)
Input Voltage: 6.2V – 8.5V( 2 batteries)
Input Current: 1.3 Amps – 40 Amps
Screen on Current: 25 mAh
Quiescent Current: 1 mAh
Power Down Current: 350 uA
Screen Size: 0.69″ OLED
Each set contains:
1pc IPV V3 150W Box Mod
1pc USB cable,only for data upgrade, not for charging
1pc User manual
1pc Gift box
1pc Screw driver